A. Below is a summary of all the net.exe usage methods.
Used to modify user accounts. Specified on its own will give information about the current logon.
|/forcelogoff:<minutes or no>||Minutes until the user gets logged off after logon hours expire. No means a forced logoff will not occur|
|/lockoutthreshold:<number of failed attempts>||This parameter allows you to configure the number of failed logon attempts before the account is locked. The range is 1 to 999.|
|/lockoutduration:<minutes>||This parameter specifies the number of minutes accounts remain locked before automatically becoming unlocked. The range is 1 to 99999.|
|/lockoutwindow:<minutes>||This parameter lets you configure the maximum number of minutes between two consecutive failed logon attempts before an account is locked. The range is 1 to 99999.|
|/minpwlen:<length>||Minimum number of characters for the password. Default is 6, valid range is between 0 and 14|
|/maxpwage:<days>||Maximum number of days a password is valid. Default is 90, valid range is between 0 and 49710|
|/minpwage:<days>||Number of days that must occur before the password can be changed. Default is 0, valid range is between 0 and maxpwage|
|/uniquepw:<number>||Password may not be reused for number attempts|
|/sync||Forces a domain sync|
|/domain||Performs any of the above actions on the domain controller|
Used to add and remove computer accounts from the domain.
|\\<computer name>||Name of the computer to be added or removed|
|/add||Add the specified computer|
|/del||Removes the specified computer|
net config server
Allows modifications to the server service. Entered with no parameters give details of the current configuration
|/autodisconnect:<minutes>||Number of minutes an account may be inactive before disconnection. Default is 15, valid range between 1 and 65535. -1 means never disconnected.|
|/srvcomment:"text"||Set the comment for the machine|
|/hidden:<yes or no>||Specified is the computer is hidden in the listing of computers|
net config workstation
Allows modifications to the workstation service. Entered with no parameters give details of the current configuration
|/charcount:<bytes>||Number of bytes to be collected before data is sent. The default is 16, valid range is between 0 and 65535.|
|/chartime:<msec>||Number of milliseconds NT waits before sending data. If charcount is also set whichever is satisfied first is used. Default is 250, valid range is between 0 and 65535000.|
|/charwait:<seconds>||Number of seconds NT waits for a communications device to become available. Default is 3600, valid is between 0 and 65535.|
net continue <service name>
Restarts the specified paused service.
Lists any files that are open/locked via a network share.
|id||Identification of the file (given by entering net file on its own)|
|/close||Close the specified lock|
See Q. How can I tell who has which files open on a machine? for more details.
Adds/modifies global groups on servers. Without parameters will list global groups.
net group <group name> \[/command:"<text>"\]
net group <group name> \[/add \[/comment:"<text>"\] or /delete\] \[/domain\]
net group <group name> <user name> /add or /delete \[/domain\]
|groupname||Name of the global group|
|/comment:"<text>"||Comment if a new global group is created. Up to 48 characters|
|/domain||Performs the function on the primary domain controller|
|username||Username to which apply the operation|
|/add||Adds the specified user to the group or the group to the domain|
|/delete||Removes a group from a domain or a user from a group|
Performs actions on local groups. Same parameters as net group.
Adds/removes a name to which messaging may be directed to. Running the command on its own will list all messaging names eligible on the machine.
|name||The messaging name to be added/removed|
|/add||Add the name|
|/delete||Remove the name|
net pause <service name>
Used to pause a service from the command line.
Used to list/modify print jobs.
|\\computername||Indicates the computer that hosts the printer queue|
|sharename||Name of the printer queue|
|job||The job number to modify|
|/hold||Pauses a job on the print queue|
|/release||Removes the hold status of a job on the print queue|
|/delete||Deletes a job off of the print queue|
Sends a message to a computer, user or messaging name.
|name||Name of the user, computer or messaging name. Can also use * to send to everyone in the group|
|/domain:<domain name>||All users in the current domain or the specified domain|
|/users||To all users connected to the server|
|message||The message to send|
Lists or disconnects sessions. Used with no options lists the current sessions.
|\\<computer name>||The computer of whose session to close|
|/delete||Closes the session to the computer specified. Omitting a computer name will close all sessions|
Used to manage shares from the command line.
net share <sharename>=<drive>:\<directory>
\[/users=<number> or /unlimited\] \[/remark:"text"\]
net share <sharename> \[/users=<number> or /unlimited\] \[/remark:"text"\]
net share <sharename or device name or drive and path> /delete
|<sharename>||Name of the share|
|<device name>||Used to specify the printer name if specifying a printer share|
|/users:<number>||Number of simultaneous connections to the share|
|/remark:"<text>"||Comment for the share|
|/delete||Delete the specifed share|
net start <service name>
Start the specified service
net statistics \[workstation or service\]
Gives information about either the server or workstation service.
net stop <service name>
Stops the specified service
Used to synchronize the time of a computer.
|\\<computer name>||The name of the computer to which synchronize the time|
|/domain:<domain>||Synchronize the time with the specified domain|
|/set||Sets the time|
Connects or disconnects to a network share. Used with no qualifiers lists the current network mappings.
net use <device name> or * \\<computer name>\<share name>
\[password or *\] \[/user:\[domain\user\] /delete or \[persistent:\[yes or no\]\]
net use <device name> /home /delete or /persistent:\[yes or no\]
|<device name>||Name of the device to map to. Use * to use the next available device name|
|\\computer name||The name of the computer controlling the resource|
|\sharename||Name of the share|
|\volume||Name of the volume if on a NetWare server|
|password||Password to which to map|
|*||Gives a prompt to which to enter the password|
|/user:<domain>\<user>||Specifies the user to connect as|
|/home||Connects to a users home directory|
|/delete||Closes a connection|
|/persistent:\[yes or no>||Sets if the connection should be reconnected at next logon|
Used to add/create/modify user accounts
net user <username> \[password or *\] \[/add\] \[options\] \[/domain\]
net user <username\] /delete /domain
|username||The name of the account|
|password||Assigns or changes a password|
|*||Gives a prompt for the password|
|/domain||perform on a domain|
|/add||Creates the account|
|/delete||Removes the account|
|/active:\[yes or no\]||Activates or deactivates the account|
|/comment:"<text>"||Adds a descriptive comment|
|/counterycode.nnn||nnn is the number operating system code. Use 0 for the operating systems default|
|/expires:<date or never>||The expiry date of the account. Date format is mm,dd,yy or dd,mm,yy which is determined by the country code|
|/fullname:"<name>"||The full name of the account|
|/homedir:<path>||Path for the users home directory|
|/passwordchg:\[yes or no\]||Used to specify if the user can modify the password|
|/passwordreq:\[yes or no\]||Used to determine if the account needs a password|
|/profilepath:<path>||Used to specify the profile path|
|/scriptpath:<path>||Path of the logon script|
|/times:<times or all>||Hours user may logon|
|/usercomment:"<text>"||A comment for the account|
|/workstations:<machine names>||Names the user may logon to. * means all.|
Lists shared resources on a domain. Used with no parameters lists all machine accounts in a domain.
|\\computer name||Specifies the computer whose resource should be viewed|
|/domain:<domain name>||The domain to be used|
|/network:<NetWare network>||A NetWare network to be used|