JSI Tip 7130. What error codes can a Windows 2000, Windows XP, or Windows Server 2003 client computer receive when making a dial-up or VPN connection?

NOTE: Error codes greater than 900 only occur when you try to connect to RRAS (Routing and Remote Access Server) that is running Windows 2000 or later.

Error		D e s c r i p t i o n
601		The port handle is invalid.
602		The port is already open.
603		Caller's buffer is too small.
604		Wrong information specified.
605		Cannot set port information.
606		The port is not connected.
607		The event is invalid.
608		The device does not exist.
609		The device type does not exist.
610		The buffer is invalid.
611		The route is not available.
612		The route is not allocated.
613		Invalid compression specified.
614		Out of buffers.
615		The port was not found.
616		An asynchronous request is pending.
617		The port or device is already disconnecting.
618		The port is not open.
619		The port is disconnected.
620		There are no endpoints.
621		Cannot open the phone book file.
622		Cannot load the phone book file.
623		Cannot find the phone book entry.
624		Cannot write the phone book file.
625		Invalid information found in the phone book.
626		Cannot load a string.
627		Cannot find key.
628		The port was disconnected.
629		The port was disconnected by the remote machine.
630		The port was disconnected due to hardware failure.
631		The port was disconnected by the user.
632		The structure size is incorrect.
633		The port is already in use or is not configured for Remote Access dialout.
634		Cannot register your computer on the remote network.
635		Unknown error.
636		The wrong device is attached to the port.
637		The string could not be converted.
638		The request has timed out.
639		No asynchronous net available.
640		A NetBIOS error has occurred.
641		The server cannot allocate NetBIOS resources needed to support the client.
642		One of your NetBIOS names is already registered on the remote network.
643		A network adapter at the server failed.
644		You will not receive network message popups.
645		Internal authentication error.
646		The account is not permitted to log on at this time of day.
647		The account is disabled.
648		The password has expired.
649		The account does not have Remote Access permission.
650		The Remote Access server is not responding.
651		Your modem (or other connecting device) has reported an error.
652		Unrecognized response from the device.
653		A macro required by the device was not found in the device .INF file section.
654		A command or response in the device .INF file section refers to an undefined macro
655		The <message> macro was not found in the device .INF file section.
656		The <defaultoff> macro in the device .INF file section contains an undefined macro
657		The device .INF file could not be opened.
658		The device name in the device .INF or media .INI file is too long.
659		The media .INI file refers to an unknown device name.
660		The device .INF file contains no responses for the command.
661		The device .INF file is missing a command.
662		Attempted to set a macro not listed in device .INF file section.
663		The media .INI file refers to an unknown device type.
664		Cannot allocate memory.
665		The port is not configured for Remote Access.
666		Your modem (or other connecting device) is not functioning.
667		Cannot read the media .INI file.
668		The connection dropped.
669		The usage parameter in the media .INI file is invalid.
670		Cannot read the section name from the media .INI file.
671		Cannot read the device type from the media .INI file.
672		Cannot read the device name from the media .INI file.
673		Cannot read the usage from the media .INI file.
674		Cannot read the maximum connection BPS rate from the media .INI file.
675		Cannot read the maximum carrier BPS rate from the media .INI file.
676		The line is busy.
677		A person answered instead of a modem.
678		There is no answer.
679		Cannot detect carrier.
680		There is no dial tone.
681		General error reported by device.
682		ERROR WRITING SECTIONNAME
683		ERROR WRITING DEVICETYPE
684		ERROR WRITING DEVICENAME
685		ERROR WRITING MAXCONNECTBPS
686		ERROR WRITING MAXCARRIERBPS
687		ERROR WRITING USAGE
688		ERROR WRITING DEFAULTOFF
689		ERROR READING DEFAULTOFF
690		ERROR EMPTY INI FILE
691		Access denied because username and/or password is invalid on the domain.
692		Hardware failure in port or attached device.
693		ERROR NOT BINARY MACRO
694		ERROR DCB NOT FOUND
695		ERROR STATE MACHINES NOT STARTED
696		ERROR STATE MACHINES ALREADY STARTED
697		ERROR PARTIAL RESPONSE LOOPING
698		A response keyname in the device .INF file is not in the expected format.
699		The device response caused buffer overflow.
700		The expanded command in the device .INF file is too long.
701		The device moved to a BPS rate not supported by the COM driver.
702		Device response received when none expected.
703		ERROR INTERACTIVE MODE
704		ERROR BAD CALLBACK NUMBER
705		ERROR INVALID AUTH STATE
706		ERROR WRITING INITBPS
707		X.25 diagnostic indication.
708		The account has expired.
709		Error changing password on domain.
710		Serial overrun errors were detected while communicating with your modem.
711		RasMan initialization failure. Check the event log.
712		Biplex port is initializing. Wait a few seconds and redial.
713		No active ISDN lines are available.
714		Not enough ISDN channels are available to make the call.
715		Too many errors occurred because of poor phone line quality.
716		The Remote Access IP configuration is unusable.
717		No IP addresses are available in the static pool of Remote Access IP addresses.
718		PPP timeout.
719		PPP terminated by remote machine.
720		No PPP control protocols configured.
721		Remote PPP peer is not responding.
722		The PPP packet is invalid.
723		The phone number, including prefix and suffix, is too long.
724		The IPX protocol cannot dial-out on the port because the computer is an IPX router.
725		The IPX protocol cannot dial-in on the port because the IPX router is not installed.
726		The IPX protocol cannot be used for dial-out on more than one port at a time.
727		Cannot access TCPCFG.DLL.
728		Cannot find an IP adapter bound to Remote Access.
729		SLIP cannot be used unless the IP protocol is installed.
730		Computer registration is not complete.
731		The protocol is not configured.
732		The PPP negotiation is not converging.
733		The PPP control protocol for this network protocol is not available on the server.
734		The PPP link control protocol terminated..
735		The requested address was rejected by the server..
736		The remote computer terminated the control protocol.
737		Loopback detected..
738		The server did not assign an address.
739		The remote server cannot use the Windows NT encrypted password.
740		The TAPI devices configured for Remote Access failed to initialize or were not installed correctly.
741		The local computer does not support encryption.
742		The remote server does not support encryption.
743		The remote server requires encryption.
744		Cannot use the IPX net number assigned by the remote server. Check the event log.
745		ERROR_INVALID_SMM
746		ERROR_SMM_UNINITIALIZED
747		ERROR_NO_MAC_FOR_PORT
748		ERROR_SMM_TIMEOUT
749		ERROR_BAD_PHONE_NUMBER
750		ERROR_WRONG_MODULE
751		The callback number contains an invalid character. Only the following 18 characters are allowed: 0 to 9, T, P, W, (, ), -, @, and space
752		A syntax error was encountered while processing a script.
753		The connection could not be disconnected because it was created by the multi-protocol router.
754		The system could not find the multi-link bundle.
755		The system cannot perform automated dial because this connection has a custom dialer specified.
756		This connection is already being dialed.
757		Remote Access Services could not be started automatically. Additional information is provided in the event log.
758		Internet Connection Sharing is already enabled on the connection.
759		An error occurred while the existing Internet Connection Sharing settings were being changed.
760		An error occurred while routing capabilities were being enabled.
761		An error occurred while Internet Connection Sharing was being enabled for the connection.
762		An error occurred while the local network was being configured for sharing.
763		Internet Connection Sharing cannot be enabled. There is more than one LAN connection other than the connection to be shared.
764		No smart card reader is installed.
765		Internet Connection Sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.
766		A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.
767		Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network has more than one IP address configured. Please reconfigure the LAN connection with a single IP address before enabling Internet Connection Sharing.
768		The connection attempt failed because of failure to encrypt data.
769		The specified destination is not reachable.
770		The remote computer rejected the connection attempt.
771		The connection attempt failed because the network is busy.
772		The remote computer's network hardware is incompatible with the type of call requested.
773		The connection attempt failed because the destination number has changed.
774		The connection attempt failed because of a temporary failure. Try connecting again.
775		The call was blocked by the remote computer.
776		The call could not be connected because the remote computer has invoked the Do Not Disturb feature.
777		The connection attempt failed because the modem (or other connecting device on the remote computer is out of order.
778		It was not possible to verify the identity of the server.
779		To dial out using this connection you must use a smart card.
780		An attempted function is not valid for this connection.
781		The connection requires a certificate, and no valid certificate was found. For further assistance, click More Info or search Help and Support Center for this error number.
782		Internet Connection Sharing (ICS and Internet Connection Firewall (ICF cannot be enabled because Routing and Remote Access has been enabled on this computer. To enable ICS or ICF, first disable Routing and Remote Access. For more information about Routing and Remote Access, ICS, or ICF, see Help and Support.
783		Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.
784		You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card.
785		You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card.
786		The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.
787		The L2TP connection attempt failed because the security layer could not authenticate the remote computer.
788		The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.
789		The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
790		The L2TP connection attempt failed because certificate validation on the remote computer failed.
791		The L2TP connection attempt failed because security policy for the connection was not found.
792		The L2TP connection attempt failed because security negotiation timed out.
793		The L2TP connection attempt failed because an error occurred while negotiating security.
794		The Framed Protocol RADIUS attribute for this user is not PPP.
795		The Tunnel Type RADIUS attribute for this user is not correct.
796		The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.
797		A connection to the remote computer could not be established because the modem was not found or was busy. For further assistance, click More Info or search Help and Support Center for this error number.
798		A certificate could not be found that can be used with this Extensible Authentication Protocol.
799		Internet Connection Sharing (ICS cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1.
800		Unable to establish the VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection.
801		This connection is configured to validate the identity of the access server, but Windows cannot verify the digital certificate sent by the server.
802		The card supplied was not recognized. Please check that the card is inserted correctly, and fits tightly.
803		The PEAP configuration stored in the session cookie does not match the current session configuration.
804		The PEAP identity stored in the session cookie does not match the current identity.
805		You cannot dial using this connection at logon time, because it is configured to use logged on user's credentials.
900		The router is not running.
901		The interface is already connected.
902		The specified protocol identifier is not known to the router.
903		The Demand-dial Interface Manager is not running.
904		An interface with this name is already registered with the router.
905		An interface with this name is not registered with the router.
906		The interface is not connected.
907		The specified protocol is stopping.
908		The interface is connected and hence cannot be deleted.
909		The interface credentials have not been set.
910		This interface is already in the process of connecting.
911		An update of routing information on this interface is already in progress.
912		The interface configuration in invalid. There is already another interface that is connected to the same interface on the remote router.
913		A Remote Access Client attempted to connect over a port that was reserved for Routers only.
914		A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.
915		The client interface with this name already exists and is currently connected.
916		The interface is in a disabled state.
917		The authentication protocol was rejected by the remote peer.
918		There are no authentication protocols available for use.
919		The remote computer refused to be authenticated using the configured authentication protocol. The line has been disconnected.
920		The remote account does not have Remote Access permission.
921		The remote account has expired.
922		The remote account is disabled.
923		The remote account is not permitted to logon at this time of day.
924		Access was denied to the remote peer because username and/or password is invalid on the domain.
925		There are no routing enabled ports available for use by this demand dial interface.
926		The port has been disconnected due to inactivity.
927		The interface is not reachable at this time.
928		The Demand Dial service is in a paused state.
929		The interface has been disconnected by the administrator.
930		The authentication server did not respond to authentication requests in a timely fashion.
931		The maximum number of ports allowed for use in the multilinked connection has been reached.
932		The connection time limit for the user has been reached.
933		The maximum limit on the number of LAN interfaces supported has been reached.
934		The maximum limit on the number of Demand Dial interfaces supported has been reached.
935		The maximum limit on the number of Remote Access clients supported has been reached.
936		The port has been disconnected due to the BAP policy.
937		Because another connection of your type is in use, the incoming connection cannot accept your connection request.
938		No RADIUS servers were located on the network.
939		An invalid response was received from the RADIUS authentication server. Make sure that the case sensitive secret password for the RADIUS server is set correctly.
940		You do not have permission to connect at this time.
941		You do not have permission to connect using the current device type.
942		You do not have permission to connect using the selected authentication protocol.
943		BAP is required for this user.
944		The interface is not allowed to connect at this time.
945		The saved router configuration is incompatible with the current router.
946		RemoteAccess has detected older format user accounts that will not be migrated automatically. To migrate these manually, run XXXX.
948		The transport is already installed with the router.
949		Received invalid signature length in packet from RADIUS server.
950		Received invalid signature in packet from RADIUS server.
951		Did not receive signature along with EAPMessage from RADIUS server.
952		Received packet with invalid length or Id from RADIUS server.
953		Received packet with attribute with invalid length from RADIUS server.
954		Received invalid packet from RADIUS server.
955		Authenticator does not match in packet from RADIUS server.

Comments

Plain text