A. Every network in a cluster is assigned a metric based on its configuration, broken down into
- Does the network have a default gateway defined? If the network doesn't have a default gateway, the network is configured as a private network. If it has a gateway configured, the network is configured as a public network.
- Is the network enabled for cluster use?
Private networks that are enabled for cluster use get a metric starting at 1,000, and each additional private network get a metric incremented by 100. So the first private network enabled for cluster use gets a metric of 1,000, the next gets 1,100 and so on. If a private network isn't configured for cluster use, then it will get a much higher metric than public networks that are available for cluster use. Public networks that are enabled for cluster use get a metric starting at 10,000 and increment by 100 if there are multiple networks.
The cluster fault tolerant driver (NetFT.sys) uses the network with the lowest metric for the cluster Internet traffic, such as heartbeats, and for Cluster Shared Volume (CSV) traffic, which is why you need a 1 Gbps or 10 Gbps network for a cluster network if you're using CSV.
For the network used by live migration traffic, which is the memory of the virtual, delta copies of the virtual and then partition state (as well as CPU/device state, but this is a tiny amount of traffic) each virtual machine (VM) can have its own network priority order. By default, the nework with the second lowest metric is used while the lowest metric network, the one used by NetFT, is actually placed at the bottom of the network priority. This is because you don't want CSV traffic and live migration traffic going over the same network.
You can manually change which network is used by modifying the properties of the VM in Failover Cluster Manager and modifying the networks in the Network for live migration tab, as shown below. As you can see, the Cluster Network is moved to the bottom by default and my iSCSI network, which I unselected for use by the cluster, is still an available network for Live Migration. I'll be unselecting that one.
Best Practice Note—One interesting point is that the Live Migration network selection will include networks you haven't enabled for cluster use. So if, for example, you have an iSCSI network that you disabled for cluster use, you'll need to manually unselect that network as usable for each VM that performs live migration. I don't want live migration traffic competing with my iSCSI traffic.
Related Reading:- How do I create a failover cluster in Windows Server 2008?
- Is a Windows Server 2003 and Windows Server 2008 mixed-cluster possible?
- How can I add disk resources to a Windows Server 2008 cluster from the command line?
- How do cluster shared volumes work in Windows Server 2008 R2?
- How to Manage Failover Clusters in Windows Server 2008
- Configure Windows Server 2008 Failover Clustering from the Command Line
Check out hundreds more useful Q&As like this in John Savill's FAQ for Windows. Also, watch instructional videos made by John at ITTV.net.
