If you are running Windows 2000, Windows XP, or greater, you can determine what SCSI adapters and devices
are attached to your computer:
1. Download Rescan1.exe from Microsoft.
2. Extract the Rescan.exe file and place it in your path.
3. Open a CMD prompt and type Rescan.exe. You will a receive a display similar to:
Properties for Device 1: Device ID : PCI\VEN_9005&DEV_0010&SUBSYS_A1809005&REV_00 Device Description : Adaptec AHA-2940U2/U2W PCI SCSI Controller UI (PCI Slot) Number: 5 Adapter Properties ------------------ Bus Type : SCSI Max. Tr. Length: 0xffffffff Max. Phy. Pages: 0x11 Alignment Mask : 0x0 Child Device Properties: Initiator Path ID Target ID LUN Claimed Device --------------------------------------------------------- 7 0 3 0 Yes Tape SCSI\SEQUENTIAL&VEN_HP&PROD_C1537A&REV_L105\4&2A7500A2&0&030 Properties for Device 2: Device ID : PCI\VEN_9005&DEV_001F&SUBSYS_000F9005&REV_01 Device Description : Adaptec AHA-2940U2/U2W PCI SCSI Controller UI (PCI Slot) Number: 65 Adapter Properties ------------------ Bus Type : SCSI Max. Tr. Length: 0xffffffff Max. Phy. Pages: 0x11 Alignment Mask : 0x0 Child Device Properties: Initiator Path ID Target ID LUN Claimed Device --------------------------------------------------------- 7 0 0 0 Yes Disk 7 0 1 0 Yes Disk SCSI\DISK&VEN_QUANTUM&PROD_ATLAS_IV_9_WLS&REV_0808\4&164151BB&0&000 SCSI\DISK&VEN_QUANTUM&PROD_ATLAS_IV_9_WLS&REV_0808\4&164151BB&0&010 *** End of Device List ***
0 comments
Hide comments