JSI Tip 4643. Broadband connectivity using PPPoE is built into Windows XP?

If your broadband connection requires you to provide a name and password to access the Internet, it is likely that your ISP is using the PPPoE (Point to Point Protocol over Ethernet) protocol. If the software that the ISP provides has not been designed for Windows XP, you will receive an error when you attempt to install it.

Since Windows XP provides native support for PPPoE, there is no need to install the vendor provided protocol.

To configure Windows XP for a broadband connection using PPPoE

  1. Start / Control Panel / Network and Internet Connections / Network Connections.

  2.  
  3. Press Create a new connection (under Network Tasks) and press Next.

  4.  
  5. Press Connect to the Internet and press Next.

  6.  
  7. Press Setup my connection manually and press Next.

  8.  
  9. Press Connect using a broadband connection that requires a user name and password.

  10.  
  11. Type the name of the ISP into the Connection Name box and press Next.

  12.  
  13. Type the user name and password into:

    .

    Check the options that you desire, and press Next.


  14.  
  15. Review the settings, pressing Back to modify them. Press Finish when you are satisfied with your choices.
When you connect, Windows XP attempts to discovery the service name. If this doesn't work for you:

  1. Open Network Connections and right-click on your broadband connection, pressing Properties.

  2.  
  3. On the General tab, type the service name and press OK.



Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish