JSI Tip 2266. Windows NT 4.0 SCE issues 'Unable to save permission changes on C:'?


If you have SCE installed, and use its' ACL editor to set permissions on a partition that contains the system files, you may receive:

        Unable to save permission changes on C:
        Not enough storage is available to process this command.
                 OR
        Unable to save permission changes on C: 
        The parameter is incorrect.
The error is caused because a record can not be added to the Application event log.

The file permissions are properly updated.

If the event log was able to be written, a typical entry might look like:

   Event Type:     Information
   Event Source:   AclPropagation
   Event ID:       4096
   Description:
   ACL Propagation encountered errors on the following file system directories:

   C:\WINNT.4\system32\CertSrv\CertControl         The DACL was protected.
   C:\WINNT.4\system32\CertSrv\CertControl\alpha   The DACL was protected.
   C:\WINNT.4\system32\CertSrv\CertControl\x86     The DACL was protected.
   C:\WINNT.4\system32\CertSrv\CertEnroll          The DACL was protected.
   C:\WINNT.4\system32\config                      The DACL was protected.
   C:\WINNT.4\system32\dhcp                        The DACL was protected.
   C:\WINNT.4\system32\drivers                     The DACL was protected.
   C:\WINNT.4\system32\drivers\etc                 The DACL was protected.
   C:\WINNT.4\system32\LLS                         The DACL was protected.
   C:\WINNT.4\system32\viewers                     The DACL was protected.
   C:\WINNT.4\system32\wins                        The DACL was protected.
The SCE causes the event log record to exceed the maximum allowable value of 32 KB, which is why it could not be added.
Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish