JSI Tip 10621. How can I display the IP configuration information for a specific interface?

When you use the IPCONFIG /ALL command, it displays the configuration information for all your interfaces, as in:

Windows IP Configuration

   Host Name . . . . . . . . . . . . : jsi001
   Primary Dns Suffix  . . . . . . . : JSIINC.COM
   Node Type . . . . . . . . . . . . : Unknown
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : JSIINC.COM

Ethernet adapter Internet:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX NIC (3C905B-TX)
   Physical Address. . . . . . . . . : 00-51-AD-67-1A-3E
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : xxx.xxx.xxx.xxx
   Subnet Mask . . . . . . . . . . . : 255.255.255.248
   Default Gateway . . . . . . . . . : yyy.yyy.yyy.yyy
   DNS Servers . . . . . . . . . . . : zzz.zzz.zzz.zzz
                                       aaa.aaa.aaa.aaa
   NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter JSIINC:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : 3Com EtherLink Server 10/100 PCI (3C980B-TX)
   Physical Address. . . . . . . . . : 00-51-AD-27-1E-813
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 192.168.0.1

When you use the netsh interface ip show config command, it shows configuration information for all your interfaces, like"

Configuration for interface "Internet"
    DHCP enabled:                         No
    IP Address:                           xxx.xxx.xxx.xxx
    SubnetMask:                           255.255.255.248
    Default Gateway:                      yyy.yyy.yyy.yyy
    GatewayMetric:                        0
    InterfaceMetric:                      1
    Statically Configured DNS Servers:    zzz.zzz.zzz.zzz
                                          aaa.aaa.aaa.aaa
    Statically Configured WINS Servers:   None
    Register with which suffix:           None

Configuration for interface "JSIINC"
    DHCP enabled:                         No
    IP Address:                           192.168.0.1
    SubnetMask:                           255.255.255.0
    InterfaceMetric:                      0
    Statically Configured DNS Servers:    192.168.0.1
    Statically Configured WINS Servers:   None
    Register with which suffix:           Primary only

If you wish to display IP configuration information for a specific interface, use:

netsh interface ip show config "Interface Name"

Example

Typing netsh interface ip show config "JSIINC" returns:

Configuration for interface "JSIINC"
    DHCP enabled:                         No
    IP Address:                           192.168.0.1
    SubnetMask:                           255.255.255.0
    InterfaceMetric:                      0
    Statically Configured DNS Servers:    192.168.0.1
    Statically Configured WINS Servers:   None
    Register with which suffix:           Primary only

NOTE: How can I rename an interface (Local Area Connection) from the command-line?

NOTE: How do I retrieve an interface \{GUID\}?

NOTE: How can I locate the registry key for the TCPIP service parameters interface for my LAN?

Comments

Plain text